Rockwell Automation 1783-Mxxx Stratix 8000 and 8300 Ethernet Managed Switches User Manual - Manual (Page 156)

156 Rockwell Automation Publication 1783-UM003I-EN-P - March 2014
Chapter 5 Manage the Switch via the Studio 5000 Environment
Switch Status Through the software, you can monitor switch status. Use this tab to monitor the
switch and port conditions to quickly see if a fault or error condition exists. This
tab also shows the overall health of the switch (temperature and power).
Field Description
Alarms Displays the active switch and port alarms:
• Active Alarms
– None
– Port alarm
– Dual Mode Power Supply alarm
– Primary Temperature alarm
• Major Alarm Relay Configured State—Displays whether the major alarm relay is configured.
• Major Alarm Relay—Displays whether the major alarm relay is On or Off.
• Minor Alarm Relay Configured State—Displays whether the minor alarm relay is configured.
• Minor Alarm Relay—Displays whether the minor alarm relay is On or Off.
Active Faults Displays the active switch and port faults. If the port and hardware faults are active, the Hardware fault appears.
Valid values:
• None
• Port fault
• Hardware fault
Traffic Threshold Exceeded on Any Port Displays a yes or no value indicating whether the current unicast, multicast, and broadcast thresholds have been exceeded on any port.
To view the status of the active ports, click the Port Status tab. To view the threshold values, click the Advanced - Port Threshold tab.
Status Displays the status of the switch:
• Switch Uptime—Displays the days, hours, and minutes that the switch has been functioning since the last reboot.
• Switch Temperature—Displays the current internal temperature (in degree Celsius) of the switch.
• Power Present on Terminal A—Displays a yes or no value indicating whether power is present on Terminal A.
• Power Present on Terminal B—Displays a yes or no value indicating whether power is present on Terminal B.
• Number of Active Multicast Groups—Displays the number of active multicast groups.
• IOS Release—Displays the current version of the switch operating system.
• Bandwidth Utilization—Displays the total percentage of the switch bandwidth being used.