Cryptographic ios software (optional), Cable diagnostics, Advanced software features – Rockwell Automation 1783-Mxxx Stratix 8000 and 8300 Ethernet Managed Switches User Manual User Manual
Page 85
Rockwell Automation Publication 1783-UM003I-EN-P - March 2014
85
Switch Software Features Chapter 3
Cryptographic IOS Software
(optional)
The Stratix 8000 and Stratix 8300 cryptographic IOS (available as a separate
catalog number for downloading) provides network security by encrypting
administrator traffic during Telnet and SNMP sessions. The cryptographic IOS
supports all features of the standard IOS, as well as these protocols:
• Secure Shell (SSH) Protocol v2
• SNMPv3
• HTTPS
Cable Diagnostics
The Cable Diagnostics feature lets you run a test on each switch port to
determine the integrity of the cable connected to the gigabit ports or the RJ45
(copper) ports. This feature is not available for fiber ports.
The test determines the distance to the break from the switch for each cable with
a plus or minus error value individually listed.
Advanced Software Features
More advanced software features are available, some of which are configured by
the global macro or port roles for typical automation applications described in
this manual.
For information about how to configure features not available in the Device
Manager Web interface or Studio 5000 environment, see the following manuals:
• For more information about these features and how to modify them, see
the Cisco IE3000 Switch Software Configuration Manual, available from
.
• For information about using the command-line interface for more detailed
configuring of these software features, see the Cisco IE3000 Switch
Command-Line Interface Manual, available from
.