100base-fx ports, Sfp transceiver ports, 100base-fx ports sfp transceiver ports – Rockwell Automation 1783-Mxxx Stratix 8000 and 8300 Ethernet Managed Switches User Manual User Manual
Page 192
192
Rockwell Automation Publication 1783-UM003I-EN-P - March 2014
Appendix D Cables and Connectors
Figure 21 - Four Twisted-pair Crossover Cable Schematic
100BASE-FX Ports
The 100BASE-FX ports use the following:
• LC connectors, as shown in the following figure
• 50/125- or 62.5/125-micron multimode fiber-optic cables
Figure 22 - Fiber-optic SFP Module LC Connector
SFP Transceiver Ports
The switch uses SFP transceivers for fiber-optic uplink ports.
1 TPO+
2 TPO-
3 TP1+
6 TP1-
1 TP0+
Switch
Switch
2 TP0-
3 TP1+
6 TP1-
4 TP2+
5 TP2-
7 TP3+
8 TP3-
4 TP2+
5 TP2-
7 TP3+
8 TP3-
ATTENTION: Invisible laser radiation can be emitted from disconnected
fibers or connectors. Do not stare into beams or view directly with
optical instruments.
ATTENTION: Invisible laser radiation can be emitted from disconnected
fibers or connectors. Do not stare into beams or view directly with
optical instruments.