Rockwell Automation 1783-Mxxx Stratix 8000 and 8300 Ethernet Managed Switches User Manual - Manual (Page 146)

146 Rockwell Automation Publication 1783-UM003I-EN-P - March 2014
Chapter 5 Manage the Switch via the Studio 5000 Environment
Add a Switch to the I/O
Configuration Tree Follow this procedure to add the switch to the controller’s I/O tree.
1. Open the project file for the controller to monitor the switch.
2. Right-click Ethernet and choose New Module.
3. On the Select Module Type dialog box, select the switch and click Create.
IMPORTANT You must complete these steps before you can go online to configure and
monitor the switch.