Rockwell Automation 1783-Mxxx Stratix 8000 and 8300 Ethernet Managed Switches User Manual - Manual (Page 126)

126 Rockwell Automation Publication 1783-UM003I-EN-P - March 2014
Chapter 4 Manage the Switch via the Device Manager Web Interface
On the Add/Edit Profile Instance window, you can configure the alarms and
actions for an alarm profile.
Field Description
Name A unique name for the alarm profile.
Alarm Name These alarms can trigger an action:
• Link Fault
• Port Not Forwarding
• Port Not Operating
• Fcs Bit Error Rate
DM Alarms Alarm information appears on the dashboard of the Device Manager Web interface.
SNMP Trap Alarm traps will be sent to an SNMP server, if SNMP is enabled on the Configure >
Security > SNMP window.
HW Relay The switch's alarm relay is triggered, sending a fault signal to a connected external alarm
device, such as a bell, light, or other signaling device that you have configured.
Syslog Alarm traps are recorded in the syslog. You can view the syslog on the Monitor > Syslog
window.