Rockwell Automation 1783-Mxxx Stratix 8000 and 8300 Ethernet Managed Switches User Manual - Manual (Page 89)

Rockwell Automation Publication 1783-UM003I-EN-P - March 2014 89
Manage the Switch via the Device Manager Web Interface Chapter 4
Dashboard Overview You can use the dashboard to monitor switch status and performance.
The Dashboard window is similar to the Monitor > Trends window. The
Dashboard window displays the instantaneous status while the Trends window
displays the historical status. By using them together, you can gather the detailed
conditions of the switch and its ports. For information about the Trends window,
see
page 127 .
Front Panel View and Status Indicators
The Front Panel view is a graphical display of the front panels of the base switch
and attached switch expansion modules.
The switch components on the Front Panel view are color-coded by status. The
colors help you to quickly see if a fault or an error condition exists. The
system-level status indicators and port-level status indicators shown on the Front
Panel view match those on the physical switch.
Table 5 - System-level Status Indicators
Indicator Status Description
EIP Mod The EIP Mod status indicator shows the status of the switch.
Off Power to the switch is off or is not properly connected.
Solid green The switch is operating properly.
Blinking green The switch is not configured. For example, the switch does not have an IP address configured.
Blinking red The switch has detected a recoverable system fault. Use the System Log to see more details about the problem.
See View System Log Messages on page 132 .
Solid red The switch has detected a non-recoverable system. Use the System Log to see more details about the problem.
See View System Log Messages on page 132 .
Blinking green and red The switch is running its power-on self-test (POST).