Rockwell Automation 1757-ABRIO Process Remote I/O (RIO) Communication Interface Module - Manual (Page 128)

126 Publication 1757-UM007D-EN-P - December 2008
Chapter 9 Accessing HART Data
4. Click OK to start the search.
The HART Configuration program displays a progress bar as it
searches the HART network devices. When the search is
complete, expand the HART Config to display the devices
found.
Send a Message or Add a Cyclic Command to a Device
To send a message to a device or add a cyclic command to a device,
complete the following steps.
1. Select the HART device.
2. Right-click the device and select Send>Add Message.
A dialog box opens with available HART commands.