Rockwell Automation 1757-ABRIO Process Remote I/O (RIO) Communication Interface Module - Manual (Page 129)

Publication 1757-UM007D-EN-P - December 2008 127
Accessing HART Data Chapter 9
3. Select the command you want to execute and click Open.
The HART Command dialog box for that command opens.
a. If the Command has any required arguments, enter them in
the Command Arguments area.
b. To execute a command just once, click Execute. For example,
you could execute a command to confirm that the command
works correctly, or to configure a device.
c. To add a cyclic command, enter the offset (Numeric or Text)
where the data returned from the command will be stored.
d. To return the message status to a flag tag, enter the offset into
the Flag Ofs field.
4. Click AddCyclic.
When you have finished adding cyclic commands, close the
HART configuration program.
TIP
The first time you configure a HART interface module,
the dialog box that opens may contain the folder HART
Command File. Choose this file to view all available
commands