Rockwell Automation 1747-SCNR ControlNet Scanner Module Reference Manual - Manual (Page 100)

Publication 1747-RM623D-EN-P - June 2006
E-22 Application Examples
The 1747-SCNR and 1747-ACNR15 modules are shown as nodes
1 and 3, respectively. The three I/O modules are under the
1747-ACNR15 in slots 1 through 3 of the 1747-ACNR15 chassis.
3. To establish a 16-bit rack connection to the 1747-ACNR15
chassis, right-click the 1747-ACNR15 and choose ControlNet
Configuration.
You see the following window.
Note that addresses in the Connection Properties window are
already displayed in the fields. To have RSNetWorx for
ControlNet software choose the next available, valid I/O or
M-file addresses for all connections:
a. Click the Auto Address Preferences button.
b. Click the box next to Enable Automatic Addressing on Insert
so that a check mark appears in the box.
c. Click OK.