Rockwell Automation 1747-SCNR ControlNet Scanner Module Reference Manual - Manual (Page 133)

Publication 1747-RM623D-EN-P - June 2006
Application Examples E-55
Configure a Scheduled Connection Between
ControlNet Scanners
We are now ready to configure the necessary ControlNet connections
to effectively transfer data between two SLC processors on a
ControlNet network. These connections are scheduled connections,
meaning that their throughput is deterministic and repeatable. If such
data transfers between SLC processors on the ControlNet network do
not require this type of determinism, then 1747-KFC15 modules may
be used to let SLC processors to send unscheduled messages on a
ControlNet network.
1 . Right-click the 1747-SCNR scanner at node 1.
2. Choose Scanlist Configuration. You are prompted to enter the
Edit mode.
3. Click YES.
You see the following screen: