Rockwell Automation 1747-SCNR ControlNet Scanner Module Reference Manual - Manual (Page 98)

Publication 1747-RM623D-EN-P - June 2006
E-20 Application Examples
In this window, you must select the communication path
previously configured in RSLinx software for communicating
with your ControlNet network. For this example, a 1784-KTCX15
ControlNet PC card is used.
3. Click the 1784-KTCX15 card to select it.
4. Click OK.
The software will attempt to communicate with all possible node
numbers on the network, from 1 to 99. The online network
screen appears. For this example, the screen should show node
99 as the programming terminal as shown below.
Node 1 is the 1747-SCNR scanner and node 3 is the
1747-ACNR15 module . The 1747-ACNR15 module resides in slot
0 of its chassis, while slot 1 contains a 1746-IA16, slot 2 contains
a 1746-OB16, and slot 3 contains a 1746-NI8. For this example,
two separate ControlNet connections will be configured. The
first will be a Discrete 16 Bit Exclusive Owner rack connection
for the two discrete I/O modules. The second will be a Module
Connection to the 1746-NI8 8 input analog module. Before we
create this connection, we should verify the chassis
configuration for the 1747-ACNR15 module. To do this:
5. Right-click the 1747-ACNR15 module.