Rockwell Automation 1747-SCNR ControlNet Scanner Module Reference Manual User Manual

Page 129

Advertising
background image

Publication 1747-RM623D-EN-P - June 2006

Application Examples E-51

5. Click OK. The Connection Properties window closes and the

Scanlist Configuration window appears and looks as follows:

You have successfully configured your two connections to read/write
data between the SLC processor and the Flex I/O on the ControlNet
network. All that remains is to save the configuration to the network
keeper, which in this case is the 1747-SCNR scanner.

1 . Click the Save icon or click the File menu and then Save.

You are prompted to Optimize and re-write schedule for all
connections.

2. Click OK.

3. Click YES to the warning message.

Your network configuration information is now written to the
network keeper.

The display on the front of your 1747-SCNR scanner should
show an image of a full glass next to the word I/O. This
indicates that all configured connections have been successfully
downloaded to the scanner. In addition, the A and OK LEDs
should be solid green and the B LED should be off, unless you
are using the redundant media option, which is not being used
in this example. The 1794-ACNR15 module should be displaying
a green COMM A and STATUS LED, while COMM B should be
off.

Advertising