Rockwell Automation 1747-SCNR ControlNet Scanner Module Reference Manual - Manual (Page 131)

Publication 1747-RM623D-EN-P - June 2006
Application Examples E-53
Configure the ControlNet Network with RSNetWorx
for ControlNet Software
Follow the procedure below to configure the ControlNet network
using RSNetWorx for ControlNet software.
1 . Start RSNetWorx for ControlNet software by double-clicking its
icon.
You see this screen:
At this time, you can configure your ControlNet network offline
and then download it to the network. But in this example, we
go online and configure the network.
2. Go online by clicking the Online icon or by clicking the
Network menu and selecting Online.
You see the Browse for Network window. In this window, you
must select the communication path previously configured in
RSLinx for communicating with your ControlNet network. For
this example, a 1784-KTCX15 ControlNet PC card is used.
3. Click the 1784-KTCX15 card to select it.
4. Click OK.