Rockwell Automation 1747-SCNR ControlNet Scanner Module Reference Manual - Manual (Page 137)

Publication 1747-RM623D-EN-P - June 2006
Application Examples E-59
Please refer to the Hardware Setup section at the beginning of
this application example to match the slot numbers in the M-file
addresses to the slot numbers of the scanners in their respective
chassis. The starting Status Addresses for these connections will
be M1:1.600/00 and M1:1.600/02.
You must now save your Scanlist for node 2 to the network
keeper.
1 1 . Click the Save icon or click the File menu and then Save.
You are prompted to Optimize and re-write schedule for all
connections.
1 2. Click OK.
1 3. Click YES to the warning message
The Scanlist Configuration screens for nodes 1 and 2 should
look as follows: