Rockwell Automation 1763 MicroLogix 1100 Programmable Controllers User Manual - Manual (Page 109)

Publication 1763-UM001D-EN-P - March 2011
Using the LCD 107
Selecting Between Menu Items
Cursor Display
OK
Cursor up or down
Apply or Enter
The symbol " " is used as the cursor.
There are two different cursor types:
Selection cursor (the symbol “ ”) is displayed left
to the selected item.
• Move cursor with the up/down arrows
Full block navigation is shown as a flashing block:
• Change position with left/right arrows
• Change values with up/down arrows
Flashing value is presented as an empty rectangle for explanation purpose.