Rockwell Automation 1763 MicroLogix 1100 Programmable Controllers User Manual - Manual (Page 76)

Publication 1763-UM001D-EN-P - March 2011
74 Communication Connections
2. Then, press the OK key on the LCD keypad. The Advanced Settings
Menu screen is displayed, as shown below.
3. Select DCOMM Cfg using the Up and Down keys, as shown below, and
then press the OK key.
4. The DCOMM Configuration screen is displayed, as shown below. The
current status, Disable in this example, is selected by default.
The DCOMM status indicator, which is the third of the five indicators
at the top left of the LED display, is displayed in empty rectangle. It
means that the communication configuration is set to a user-defined
communication mode at present.
CO
MM
0
COMM
1
DCOM
M
BA
T.
LO
U-M
SG