Connecting the battery wire connector – Rockwell Automation 1763 MicroLogix 1100 Programmable Controllers User Manual User Manual
Page 34
Advertising
![background image](/manuals/579860/34/background.png)
Publication 1763-UM001D-EN-P - March 2011
32 Installing Your Controller
Connecting the Battery Wire Connector
Follow the procedure below to connect the battery wire connector to the
battery connector.
1. Insert the replaceable battery wire connector into the battery connector.
2. Secure the battery connector wires along the wire guide as shown below.
ESC
OK
Wire Guide
Battery Connector Wires
Replaceable Battery
Replaceable Battery Pocket
Battery Wire Connector
Battery Connector
Advertising