Rockwell Automation 1763 MicroLogix 1100 Programmable Controllers User Manual - Manual (Page 134)

Publication 1763-UM001D-EN-P - March 2011
132 Using the LCD
3. Select KeyIn Mode using the Up and Down keys, and then press the
OK key.
4. The Key In Mode screen is displayed, as shown below. The current
mode, Continuous in this example, is selected marked up with the
symbol “ ”.
5. Press the Up or Down key to select the different mode, Discrete in this
example, as shown below. Then, press the OK key.
6. The Key In Mode Change Notification screen is displayed, as shown
below.
7. Press the ESC key to return to the Advanced Settings Menu screen, as
shown in step 2 .