Rockwell Automation 2500 CENTERLINE Motor Control Centers Installation Manual - Manual (Page 16)

16 Rockwell Automation Publication 2500-IN001C-EN-P - April 2014
Chapter 1 System Overview
Additional bracing is provided for ArcShield columns.
Figure 4 - ArcShield Column Protection Hardware
Figure 5 - Column Configuration
Frame-mounted Brackets
See page 46 for more
information.
Door Latch Brackets
See page 46 for more information.
Pressure Relief Plate
See page 23 for more information.
Detail A
Detail B
Detail C
A
B
C
Detail D
D
Center End Closing
Plate with Insulator
Only on end-of-lineup
columns.
See Figure 3 on page 15
for more details.
Columns Installed in a Single-front Configuration Columns Installed in a Double-front Configuration
NOTE: A 400 mm air gap is required between
3200 A and 4000 A configurations.