Rockwell Automation 2500 CENTERLINE Motor Control Centers Installation Manual - Manual (Page 49)

Rockwell Automation Publication 2500-IN001C-EN-P - April 2014 49
Chapter
5
Door Latches, Operator Handles, and Unit
Interlocks
Height Considerations In accordance with EN 61439-1, operating devices (push buttons and handles)
should be no more than 2000 mm above floor level. If the MCC is mounted on
an elevated surface, the height from the floor to the center of the top handles
must be checked for compliance.
Figure 16 - Operator Handle Height
Heigh
t of H
andle
2000
mm,
max
Floor
Line