Nameplate data – Rockwell Automation 2500 CENTERLINE Motor Control Centers Installation Manual User Manual
Page 18
18
Rockwell Automation Publication 2500-IN001C-EN-P - April 2014
Chapter 1
System Overview
Nameplate Data
In compliance with EN 61439-1, each CENTERLINE 2500 MCC column is
supplied with a nameplate on the enclosure or vertical wireway door.
Figure 6 - Column Nameplate
Each unit also has an identification label. On withdrawable units, the unit
identification label is on the interior of the bottom plate of the unit. On fixed
units, the unit identification label is on the interior right side plate.
Figure 7 - Unit Identification Label
Column Number
Catalog Number/Serial Number
Power Bus Voltage
and Current Rating
Enclosure
Type
Catalog Number/Serial Number
Unit Location
Device Type and Rating
Voltage Rating
Order Number
TIP
The catalog number or serial number and series letter are required to
properly identify the equipment to sales or factory personnel.