Rockwell Automation 2500 CENTERLINE Motor Control Centers Installation Manual - Manual (Page 3)

Rockwell Automation Publication 2500-IN001C-EN-P - April 2014 3
Summary of Changes
This manual contains new and updated information. Changes throughout this
revision are marked by change bars, as shown to the right of this paragraph.
New and Updated
Information This table contains the changes made to this revision.
Topic Page
Corrected the kiloamp rating shown for protection 11
Added E300™ relay as an available electronic overload relay 12
Added double-front depth and footnote to Table 3 14
Added dimension and footnote to Figure 2 14
Added note to Figure 5 16
Revised information in Technical Data table 17
Updated nameplate and unit identification labels in Figures 6, 7, and 8 18, 19
Updated humidity information in Environment section 24
Updated torque numbers for horizontal power bus connections 43
Updated environment information in Suggested Maintenance Guidelines table 74
Updated Stratix model number to 5700 in Figure 25 79
Updated artwork to show new large rotary-operator handle Throughout publication