Rockwell Automation 2500 CENTERLINE Motor Control Centers Installation Manual - Manual (Page 17)

Rockwell Automation Publication 2500-IN001C-EN-P - April 2014 17
System Overview Chapter 1
Technical Data This table provides the technical specifications for the 2500 MCC.
Standards EN 60204-1:2006 Safety of machinery – electrical equipment of machines; Part 1: General requirements
IEC 61439-1 Ed. 2.0 b:2011 Low-voltage switchgear and controlgear assemblies; Part 1: General rules
EC Directives IEC/TR 61641, ed. 2.0 2008-1 Enclosed low-voltage switchgear and controlgear assemblies – guide for testing under conditions of arcing due
to internal fault
2004/108/EC EMC directive
2006/95/EEC Low voltage directive
Certifications and
Markings ABS
ABS Shipboard http://www.rockwellautomation.com/rockwellautomation/certification/marine.page?
C-Tick http://www.rockwellautomation.com/rockwellautomation/certification/c-tick.page?
CE Conformance Marked http://www.rockwellautomation.com/rockwellautomation/certification/ce/page?#Motor
China Compulsory Certificate (CCC) http://www.rockwellautomation.com/rockwellautomation/certification/china.page?#motorcontrol
DEKRA http://www.rockwellautomation.com/rockwellautomation/certification/third.page?
GOST-R http://www.rockwellautomation.com/rockwellautomation/certification/gost/page?#/tab1
IBC 2010 http://www.rockwellautomation.com/rockwellautomation/certification/overview.page?
ICC–ES AC156 http://www.rockwellautomation.com/rockwellautomation/certification/overview.page?
IEEE 344 http://www.rockwellautomation.com/rockwellautomation/certification/overview.page?
KEMA http://www.rockwellautomation.com/rockwellautomation/certification/third.page?
SEI/ASCE 7-05 and 7-10 http://www.rockwellautomation.com/rockwellautomation/certification/overview.page?
Rated Voltages Rated operating voltage, U
e
Up to 690V, 3-phase
Rated frequency, f
n
50…60 Hz
Rated insulation voltage, U
i
1000V, 3-phase
Rated Currents Continuous current rating, I
e
Horizontal bus - up to 4000 A Vertical bus - up to 1200 A per column (3)
Short circuit peak withstand, I
pk
Horizontal and vertical buses - up to 210 kA
Short time withstand rating, I
cw
Horizontal and vertical buses - up to 100 kA for 1 second
Neutral (N) Full or half-rated
Creepage Distances
and Clearances Rated impulse withstand voltage, U
imp
6, 8, or 12 kV
Material group (overvoltage category) IIIa (175 </= CTI < 400)
Pollution degree 3
Bus Material and
Plating Horizontal power bus Copper (optional tin plating)
Vertical distribution bus Copper with tin plating
Protective earth conductor (PE) Copper (optional tin plating)
Degrees of
Protection IEC 60529 IP20, IP42, or IP54
Forms of Separation IEC 61439-1 Form 2b, 3b, or 4b
Column Dimensions Height See page 14
Width
Depth
Units Module size 80 mm high x 500 mm wide = 1 module
Modules per column, max 24 (23 for high density)
Withdrawable unit sizes 1, 2, 4, 6, 8, 10, 12 modules
Structural Surface
Treatments Interior
G90 galvanized metal
(1)
Exterior RAL 7032 Pebble Grey paint or Munsell 6.5 paint (additional colors available by request)
Environment Storage temperature -25…55 °C
Operating (ambient) temperature -5…40 °C
(2)
with up to 95% non-condensing humidity
Altitude Up to 1000 m without derating: derated after 1000 m
(1) Interior painted surfaces available as custom paint requests.
(2) The average temperature over a 24-hour period must not exceed 35 °C.
(3) Up to 600 A top and bottom, effective 1200 A per column.