Rockwell Automation 2500 CENTERLINE Motor Control Centers Installation Manual - Manual (Page 20)

20 Rockwell Automation Publication 2500-IN001C-EN-P - April 2014
Chapter 1 System Overview
ArcShield Labels MCC columns with arc proof assembly have a rating label (Detail E in Figure 9 )
below the nameplate. There are also labels on other parts that must be in place
before operating a MCC with ArcShield; see
Figure 9 .
CENTERLINE 2500 MCCs with ArcShield have a back-corner baffle at the end
of each lineup and insulation on the center side closing-plate at the end of the
lineup; see
Figure 4 on page 16 for more details. They also have external vertical
support angles at each end of the lineup.
Figure 9 - ArcShield Label Locations
C
D
E
A
B
Detail D
Detail E
Detail C
Top View
Front View – Frame Mount Front View – Withdrawable
Detail B
Detail A
NOTE: All labels
are external except
for horizontal
locations of “D.”