Rockwell Automation 2500 CENTERLINE Motor Control Centers Installation Manual - Manual (Page 54)

54 Rockwell Automation Publication 2500-IN001C-EN-P - April 2014
Chapter 5 Door Latches, Operator Handles, and Unit Interlocks
Large Rotary-operator
Handles The following is a brief summary of operating instructions for large rotary-
operator handles available for disconnects or circuit breakers.
For additional disconnect handle information, see publication 40053-127-01 ,
which is available online at http://www.rockwellautomation.com/literature .
Figure 19 - Large Rotary-operator Handle Styles
Opening the Unit Door
Follow these procedures for opening the unit door.
1. Verify the large rotary-operator
handle is in the OFF/O
position.
2. Release the door latches.
3. Hold the large rotary-operator
handle in the OFF/O position
while pushing the release
mechanism down.
4. Carefully open the unit door.
Release Mechanism
Circuit Breaker Style Disconnect Style
Release Mechanism