Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 107)

Rockwell Automation Publication HSE-IN024A-EN-E–December 2012 107
Chapter 7
Troubleshooting FactoryTalk Historian
In this chapter you will learn how to:
• Use FactoryTalk Historian ME modules with FactoryTalk
Security (page 107).
• Verify the Windows Administrator privileges (page 108).
• Resolve error and warning messages (page 109).
If you are using FactoryTalk Security to authenticate your
FactoryTalk Historian ME 1756-HISTxG module, and you want to
establish a connection between the Historian ME and SE modules,
you need to make sure the following FactoryTalk Security groups are
created in FactoryTalk Historian SE:
• FTHAdministrators
• FTHEngineers
• FTHSupervisors
• FTHOperators
To verify that these four user groups were created:
1. Click Start > All Programs > Rockwell Software > FactoryTalk
Administration Console. The FactoryTalk Administration
Console dialog box appears.
2. In the Select FactoryTalk Directory dialog box, select
Network, and click OK.
3. In the Explorer tree, expand Users and Groups > User
Groups.
Using FactoryTalk Historian
ME Modules with
FactoryTalk Security