Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 17)

Rockwell Automation Publication HSE-IN024A-EN-E–December 2012 17
Chapter 2
System Requirements
The hardware required with FactoryTalk Historian Site Edition
depends on the demands an application places on the system. The
greater the demand, the more powerful a system is required. In any
application, faster processors and more memory will result in better
performance. In addition, there should always be sufficient disk
space to provide virtual memory that is at least twice the size of the
physical memory.
Learn about the system requirements for the following components
of FactoryTalk Historian SE:
• FactoryTalk Historian SE Server Machine (page 17)
• FactoryTalk Historian Live Data Interface Machine (page 18)
• FactoryTalk Historian Client Machine (page 18)
• FactoryTalk Historian Asset Framework (page 19)
• FactoryTalk Historian DataLink (page 20)
Item Description
System requirements • FactoryTalk Historian SE 25,000 points and below
Minimum: Intel Pentium Xeon, 3.2 GHz, 4GB RAM
• FactoryTalk Historian SE 50,000 points and below
Minimum: Intel Pentium Xeon, 3.2 GHz, 4GB RAM
• FactoryTalk Historian SE 100,000 points and below
Minimum: Intel Pentium Xeon dual processor, 3.4 GHz, 4GB
RAM
Hardware • 100 Megabit or faster Ethernet card, network cable,
concentrator if using twisted pair wiring; TCP/IP protocol.
• SVGA TrueColor monitor with 1 MB of video RAM and
1024x768 resolution.
FactoryTalk Historian SE
Server Machine