Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 87)

Configuring FactoryTalk Historian Chapter 6
Rockwell Automation Publication HSE-IN024A-EN-E–December 2012 87
Item name Description
Limit The maximum number of licenses that is allocated to a
license pool or an interface type.
• For the license pools, the limits are collected from the
license activations. This information cannot be edited.
• For the FTLD interface type, the limit equals the total
number of unallocated licenses from both Rockwell and
General license pools. This information is updated
automatically and cannot be edited.
2. In the Interface Type Allocation column, type the
abbreviated name of the interface type (or point source) to
which you want to allocate a license limit. See Types of
Licenses (page 78) for more information on the interface
types.
3. In the Limit column, type the maximum number of licenses
for points that the server will use to collect data from the
selected interface type. The number must be a multiple of 50.