Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 21)

System Requirements Chapter 2
Rockwell Automation Publication HSE-IN024A-EN-E–December 2012 21
Item Description
Other software • Microsoft Excel Versions:
• Microsoft Excel 2010 (32-bit) *, **
• Microsoft Excel 2007 *
• FactoryTalk Services Platform 2.50 (CPR 9 SR 5)
NOTES
* If this is a Microsoft Office upgrade and there is a pre-existing
installation of DataLink 4.x on that machine, a removal and
reinstallation of DataLink may be necessary. Refer to the KB article
254380
(http://rockwellautomation.custhelp.com/app/answers/detail/a_id/25
4380/kw/254380) to eliminate VBA related errors that might occur
after an Excel upgrade.
** In rare instances, the PI tab does not appear on the ribbon
immediately following the installation of the Microsoft Excel add-in.
Refer to the KB article 254379
(http://rockwellautomation.custhelp.com/app/answers/detail/a_id/25
4379/kw/254379) to resolve the situation.