Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide User Manual
Page 88
Chapter 6 Configuring FactoryTalk Historian
88
Rockwell Automation Publication HSE-IN024A-EN-E–December 2012
If you type incorrect information in the Interface Type
Allocation or Limit columns, a relevant message will appear.
Read the message to learn about the error, for example:
NOTE
For PINotifications, you allocate the maximum number of
licenses for individual notifications instead of points. The licenses
are taken from the Rockwell pool.
4. Click Apply. The license limit of the
FTLD interface type is
updated accordingly:
5. Repeat the steps for other interface types that you want to add.
6. Click OK.
7. Restart the FactoryTalk Historian SE server (page 96) for the
changes to take effect.
You can view the information on the allocated licenses in System
Management Tools (page 88).