Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 69)

Configuring FactoryTalk Historian Chapter 6
Rockwell Automation Publication HSE-IN024A-EN-E–December 2012 69
The content of the dialog box differs depending on the
security component type you select.
6. View the settings of the selected security component presented
in the tabs.
You can modify the privileges of the security component to
the extent that is allowed by the component’s configuration.
See "Historian Security Components and Their Privileges
(page 63)" for more information.
7. Click OK.
To create a security mapping between a Windows user and/or
group and a Historian server user:
1. Go to Start > All Programs > Rockwell Software > FactoryTalk
Historian SE > System Management Tools. The System
Management Tools dialog box appears.
Creating Security Mappings