Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 139)

Rockwell Automation Publication HSE-IN024A-EN-E–December 2012 139
Appendix E
Removing FactoryTalk Historian
IMPORTANT
Do not remove FactoryTalk Historian SE unless you have decided not to
use Historian SE server, or you are resetting your FactoryTalk Historian
plant floor operations. Removing FactoryTalk Historian SE will result in
the loss of data.
To remove FactoryTalk Historian SE, choose either of the
following methods:
• Using the Start menu (page 140).
• Using Control Panel (page 140).
• Using the FactoryTalk Historian SE installation DVD (page
141).
If you are removing FactoryTalk Historian from a computer, on
which FactoryTalk Historian SE 3.0 has been previously installed, a
message will appear informing you that FactoryTalk Historian SE
3.0 will be removed as well when you exit the removal wizard: