Upgrading factorytalk historian, Appendix d, Upgrading factorytalk – Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide User Manual
Page 137: Historian
Rockwell Automation Publication HSE-IN024A-EN-E–December 2012
137
Appendix D
Upgrading FactoryTalk Historian
In this chapter you will learn how to upgrade your FactoryTalk
Historian 3.0 to the current version of the product.
NOTE
You need administrative rights to perform these steps.
To upgrade your Historian 3.0 to FactoryTalk Historian SE
3.01:
1. Stop the server:
1. Go to
Start > All Programs > Rockwell Software >
FactoryTalk Historian SE > Stop FactoryTalk Historian SE.
The server stopping process begins. The progress is
displayed in the Command Prompt window.
2. Wait until the server is stopped and the Command Prompt
window is closed.
2. Stop the FTHConnector service:
1. Go to
Start > All Programs > Administrative Tools >
Services. The Services dialog box appears.
2. Right-click FTHConnector and select Stop.
3. Wait until the service is stopped.
3. Install the FactoryTalk Historian components. See Installing
FactoryTalk Historian (page 25) for details.
4. Start the server:
1. Go to
Start > All Programs > Rockwell Software >
FactoryTalk Historian SE > Start FactoryTalk Historian SE.
Upgrading FactoryTalk
Historian to the Current
Version