Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 74)

Chapter 6 Configuring FactoryTalk Historian
74 Rockwell Automation Publication HSE-IN024A-EN-E–December 2012
For this FactoryTalk
Historian suite: Open these ports: Of this type:
Historian Server 5450
5454
5455
5456
5458 TCP
TCP
TCP
TCP
TCP
Live Data Interface 6000 TCP
• Allow FactoryTalk Historian Live Data Interface to
communicate through the firewall:
See the table below to learn which settings you need to use
when configuring the firewall.
Item Description
The absolute path to
the Live Data
interface
<PIHOME_Value>Interfaces\LDInterface\FTLDInt.exe,
where <PIHOME_Value> is the path specified in the
following registry key:
Computer > HKEY_LOCAL_MACHINE > Software >
Wow6432Node > PISystem
The name (ID) of the
Live Data interface PIUniint Interface to the PI System.
Network location
types
Private and public.
To check the location of the Live Data interface:
1. Open the Windows Registry Editor.
2. Go to
Computer > HKEY_LOCAL_MACHINE >
Software > Wow6432Node > PISystem.
3. Double-click the PIHOME value and copy the path from
the value data text box.
The complete path to the Live Data Interface will consist of
the following parts:
• The path you get from the registry.
• \Interfaces\LDInterface\FTLDInt.exe