Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 86)

Chapter 6 Configuring FactoryTalk Historian
86 Rockwell Automation Publication HSE-IN024A-EN-E–December 2012
7. Click Apply.
By allocating a license to an interface type (or point source), you
specify the maximum number of points with which the server will
collect data from a given interface type (or point source).
To allocate licenses to interface types:
1. In the Historian Server Connection Properties dialog box,
click the Point Sources tab.
The tab contains two tables that display the following
information:
Item name Description
Interface Type Pools of licenses (Rockwell and General) assigned to the
server.
This information cannot be edited.
Interface Type
Allocation Abbreviated names of interface types (or point sources) to
which you can allocate licenses from the license pools.
The FTLD interface type is the default type and it cannot be
edited.
Points in Use The number of points already configured for collecting data
from a given interface type.
This information is updated automatically and cannot be
edited.
Allocating Licenses to
Interface Types