Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 18)

Chapter 2 System Requirements
18 Rockwell Automation Publication HSE-IN024A-EN-E–December 2012
Item Description
Operating systems Microsoft Windows Server 2008 R2 with Service Pack 1 64-bit
Item Description
Hardware Minimum: Intel Celeron D, 3.0Ghz, 512MB RAM
Operating systems • Microsoft Windows 7 with Service Pack 1 32-bit and 64-bit
• Microsoft Windows XP with Service Pack 3 32-bit
• Microsoft Windows Server 2003 R2 with Service Pack 2 32-bit
and 64-bit
• Microsoft Windows Server 2008 R2 with Service Pack 1 64-bit
• Microsoft Windows Server 2008 with Service Pack 2 32-bit and
64-bit
Item Description
Hardware • 100 Megabit or faster Ethernet card, network cable;
concentrator if using twisted pair wiring; TCP/IP protocol
• SVGA TrueColor monitor with 1 MB of video RAM and
1024x768 resolution
• Minimum: Intel Pentium III, 600Mhz, 512MB RAM
• Recommended: Intel Celeron, 3GHz or higher, 1GB RAM or
more
Operating systems • Microsoft Windows 7 with Service Pack 1 32-bit and 64-bit
• Microsoft Windows XP with Service Pack 3 32-bit
• Microsoft Windows Server 2008 R2 with Service Pack 1 64-bit
• Microsoft Windows Server 2008 with Service Pack 2 32-bit and
64-bit
Other software • Microsoft Internet Explorer 6SP1, IE7, IE8
• Microsoft Excel 2003 or newer for FactoryTalk Historian
DataLink or FactoryTalk Historian System Management Tools
(SMT)
FactoryTalk Historian Live
Data Interface Machine
FactoryTalk Historian Client
Machine