Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 83)

Configuring FactoryTalk Historian Chapter 6
Rockwell Automation Publication HSE-IN024A-EN-E–December 2012 83
<BaseLicenseCount> = 2400
2. Calculate the number of licenses for the Rockwell license pool.
<RockwellLicensePool> = ∑ <FHLD licenses> + ∑ <FHSE
licenses> - <BaseLicenseCount>
<RockwellLicensePool> = 5000 + 12000 - 2400
<RockwellLicensePool> = 14600
3. Calculate the number of licenses for the General license pool.
<GeneralLicensePool> = ∑ <PTY3 licenses> +
<BaseLicenseCount> + ∑ <FHSE3ADD licenses>
<GeneralLicensePool> = 500 + 2400 + 2000
<GeneralLicensePool> = 4900
In this example, the total of 19500 licenses has been distributed in
the following way:
Licenses and license pools Values
License total 19500
Rockwell license pool 14600
General license pool 4900
In the following example we will calculate how licenses will be
distributed between the General and Rockwell license pools without
FHSE3ADD license activations.
We will use the following values:
Activation Value ∑
FHSE.2K 2000 12000
FHSE.10K 10000
FHSE3ADD.2K 0 0
Distributing Licenses
without FHSE3ADD
Activation