Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 36)

Chapter 4 Installing FactoryTalk Historian
36 Rockwell Automation Publication HSE-IN024A-EN-E–December 2012
NOTE
If you want to install the Asset Framework SQL database only, you need
to run the installation on the machine with the Microsoft SQL Server
installed.
To install FactoryTalk Historian Asset Framework Server:
1. Run the FactoryTalk Historian SE installation DVD.
2. On the welcome page of the installation wizard, click
Install
FactoryTalk Historian SE > Install FactoryTalk Historian Asset
Framework > Install FactoryTalk Historian AF Server.
The installation wizard appears.
If there are any software prerequisites missing from the
computer, they are listed in red at the bottom of the
installation wizard Welcome page. Click Cancel and Finish
to exit the wizard, install the prerequisites, and start the
installation wizard again.
3. On the Welcome... page, click Next.
4. On the License Agreement page, read and accept the terms of
the license agreement, selecting the I accept... option.
5. Click Next.
6. On the Review Component Installation page, review the list
of the components that are already installed and those that will
be installed during the installation process.
Click Next.
7. On the Destination Drive page, select the drive on which you
want to install the product.
If the space available on the drive is not sufficient for the
installation, a warning message will appear below the
Installation drive list. In such a case, select another drive or
increase the available space on the drive you have originally
selected. For more information on the disk space
Install FactoryTalk
Historian Asset Framework
Server