Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual - Manual (Page 130)

Publication DNET-UM003A-EN-P - August 2000
5-8 RSNetWorx for DeviceNet Starter Kit Demonstration
Monitor the I/O Data The next section of the demonstration uses the ladder logic
programming software (RSLogix 500) to go inside the processor to
monitor the I/O data for your devices on your DeviceNet network.
1. Start the ladder logic programming software. (i.e. RSLogix 500,
5000, 5)
2. Open the ladder file for your Starter Kit.
3. From the Comms menu, choose Go Online.