Locate the 90 – Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual User Manual
Page 78
Advertising
Publication DNET-UM003A-EN-P - August 2000
3-26 Connect Devices and Commission Nodes
Connect and Commission the Inductive Proximity Switch
1. Locate the 90
°
micro male to micro female cable and connect
the female end to the Inductive Proximity Switch and the 90
°
male end to a KwikLink tap.
Your network should look like this:
2. Select the “871TM Shielded 18mm with micro” switch in the
hardware window and drag it over to your network.
I-0
A-0
I-1
A-1
O-0
O-1
Auxiliary Power
Network Status
Module Status
0 1 2 3 4 5 6 7
0 1 2 3 4 5 6 7
Network
Status
Module
Status
T
T
To scanner and interface
42040
Advertising