Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual - Manual (Page 36)

Publication DNET-UM003A-EN-P - August 2000
2-14 Construct Your Starter Kit
Connect Your Power Supply The power supply that you select to use with your Starter Kit must be
within the DeviceNet specifications. Refer to the DeviceNet power
supply specifications in publication, DN-6.7.2, DeviceNet Cable
System Planning and Installation Manual for detailed information.
Follow these steps to connect your power supply:
1. Connect your 24V dc power supply to the KwikLink open style
tap.
2. Connect +24V dc to red (+).
3. Connect -24V dc to black ( - ).
TIP
Both the white and blue terminals are unused.
black
red
your
Power
Supply
42033