Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual - Manual (Page 86)

Publication DNET-UM003A-EN-P - August 2000
3-34 Connect Devices and Commission Nodes
If they are not in order, press F5 to refresh the display.
8. Save your network file.
You now have all the devices of your Starter Kit connected and
commissioned. At this point, in the real world, you would configure
each device for your application. For the Starter Kits we provide an
RSNetworx for DeviceNet (.dnt) network configuration file which has
the scanlist created and the devices mapped. We also provide
associated Rockwell Software ladder logic programming file for each
Starter Kit.