Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual - Manual (Page 43)

Publication DNET-UM003A-EN-P - August 2000
Construct Your Starter Kit 2-21
1. Locate the 1784-PCD1 cable and connect it to the PCD card installed in
your laptop computer.
2. Attach the probe cable to the other end of the 1784-PCD1 cable.
3. Connect the micro to conductor cable to the PLUG10R.
Most open-style devices ship with an open-style connector included.
These connectors are also shipped in packages of 10.
4. Connect the other end of the probe cable to PLUG10R and insert into
the 1771-SDN, 1747-SDN, or the 1756-DNB.
jack screw jack screw
mechanical key
10-pin linear plug (open)
mechanical key
41708
Blue
Shield or Bare
White
Red
Black
1787-PLUG10R
probe holes
42103