Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual - Manual (Page 131)

Publication DNET-UM003A-EN-P - August 2000
RSNetWorx for DeviceNet Starter Kit Demonstration 5-9
4. In the navigation window on the left, scroll down to the Data
Files.
You can monitor the data coming from and going to devices on the
DeviceNet network using your ladder logic software. Remember, you
determine the location of the inputs and outputs by the scanlist and
datatable map. In Chapter 4, you created the scanlist and datatable
map in the RSNetWorx and downloaded the configuration to the
scanner.
Refer to the Help screens in the RSNetWorx. Help gives you the data
formats of these devices and information as to why certain bits in the
data behave a certain way.
5. From Data Files, double click .