Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual - Manual (Page 64)

Publication DNET-UM003A-EN-P - August 2000
3-12 Connect Devices and Commission Nodes
You see:
18.Click to upload information from your network.
Wait for RSNetWorx to poll the network to see what is connected.
When RSNetWorx has browsed your network you see:
Notice that your scanner has been given the node address of 00.
Scanners take the lowest position possible. For SKITs 1 through 6 the
interface is at node 62 as assigned when the interface was configured.
(Since SKIT7 (1784-PCIDS) is both the scanner and interface, it does
not have a node 62, only node 00.) The PC interface should take the
highest node address available which is usually 62. Node 63 is the