Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual User Manual
Page 85
Advertising
Publication DNET-UM003A-EN-P - August 2000
Connect Devices and Commission Nodes 3-33
5. Select the RightSight Photoelectric Sensor and click
.
RSLinx browses the network and returns the current device
settings.
You see:
6. Change Node Address to 05 and click
and
.
You will see the RightSight Photoelectric Sensor still at node 63.
7. Click
to browse the network.
You see the devices and node addresses updated.
Advertising