Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual - Manual (Page 47)

Publication DNET-UM003A-EN-P - August 2000
Construct Your Starter Kit 2-25
Install the 1784-PCIDS Drivers
Follow these steps to install the PCID(S) drivers:
1. Insert the CD in the CD-ROM drive.
If Autorun is not configured:
1. From the Start menu, choose Run.
You see the Run pop-up window.
2. Type d:\setup (if it doesn’t appear automatically), where d is
your CDROM drive letter.
3. Click OK.
You see the progress bar, followed by the welcome screen.
4. Enter your name and company.
5. Click Next.
IMPORTANT
Exit all Windows programs before you run this Setup
program.
TIP
The CD-ROM has the Windows Autorun loaded.
Once the CD is inserted into the CD-ROM drive, if
you have Autorun configured, the installation will
automatically start at the first setup screen.
If Autorun is configured, go to step 5.
If you want to: click on:
continue with this Setup Next
You see “Enter name and
company.”
cancel Setup (because
you have not exited
other Windows
programs) Cancel
Close those programs then run
Setup again.