Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual User Manual
Page 50
Advertising
Publication DNET-UM003A-EN-P - August 2000
2-28 Construct Your Starter Kit
configured on your computer, the installation screen appears
automatically.
2. Insert the RSNetWorx CD into the CD drive and run the file
autorun.exe.
You see:
3. Select Install RSNetWorx and follow the instructions.
4. Select Install RSLinx and follow the instructions.
IMPORTANT
When prompted for a serial number use, 9876543210
or any 10 digit number.
TIP
Descriptions on how to navigate through the
software as well as the software screens are
contained in Help. Refer to the online manuals
“Getting Results” and “Quick Start” for information
on navigation. They are located on the Help menu.
Advertising