Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual User Manual
Page 134
Publication DNET-UM003A-EN-P - August 2000
5-12 RSNetWorx for DeviceNet Starter Kit Demonstration
In this screen, we have placed the cursor on the Stack Light(Red).
10. Watch the 0 in the low byte of word 3 change to a 1 when you
place the metal object against the switch.
Experiment with the other devices using steps 1 through 6 as an
example.
11. Try the RightSight Photoelectric Sensor.
12. Place your hand in front of the RightSight Photoelectric Sensor.
13. Monitor the I/O Data.
14. Watch the ladder activity.
15. Watch the ControlTower Stack Light illuminate.
16. Try the Inductive Proximity Switch.
17. Place a metal object a varying distances from the switch.
18. Watch the LED’s on the output section of the CompactBlock I/O
fluctuate.
19. Monitor the I/O Data.
20. Watch the ladder activity.
21. In your ladder logic, watch the analog data values change in
relation to the distance between the switch and the metal object.
Congratulations!
You have now completed your Starter Kit.