Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual - Manual (Page 24)

Publication DNET-UM003A-EN-P - August 2000
2-2 Construct Your Starter Kit
SKITS 1, 3, and 5
I-0
A-0
I-1
A-1
O-0
O-1
Auxiliary Power
Network Status Module Status
0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
Network Status
Module Status
CompactBlock I/O
1791D-888P 8 INPUTS / 8 OUTPUTS • DC POWER
DEVICENET
1756-DNB,
1747-SDN, or
1771-SDN
1770-KFD
Probe Cable
1787-PCABL
Inductive Proximity
Switch with micro cable
ControlTower
Stack Light
Standard Proximity Switch with
sensor cable to ArmorBlock
MaXum I/O
RightSight Photoelectric
Sensor with micro cable
CompactBlock I/O, PLUG10R, micro to
conductor cable and two 24V insulated wires
Your power supply connected
to an open style tap (IDC)
Your computer
connected with serial
cable to 1770-KFD.
Your PLC-5, SLC-500, or
ControlLogix chassis
42074
micro to conductor cable
connected to the PLUG10R
inserted into the scanner
Terminator Terminator